1/4" Cedar stringer with 1/8" Cedar stringers 3" out each side in a Burford blue blank
Full rolled bottom nose to tail.
Lots of rocker and plenty of tail lift.
Pretty sweet outline
Very flat on the deck at the nose and the tail with the centre of the board having a rolled deck.This is a copy of a 9ft 8" board that Micheal has had for some years but has gotten a little tired.
It is an interesting board in that it has about 4" of nose rocker and 5 1/2" tail lift , so it ends up with a pot belly at the wide point with the fully rolled bottom.A 12" racked fin that Wiz has foiled will sit right on the tail or at least the tip will be in line with the pintail.It was a bit of a test shaping my first multi stringer board , but actually ended up being not too bad.
It is an interesting board in that it has about 4" of nose rocker and 5 1/2" tail lift , so it ends up with a pot belly at the wide point with the fully rolled bottom.A 12" racked fin that Wiz has foiled will sit right on the tail or at least the tip will be in line with the pintail.It was a bit of a test shaping my first multi stringer board , but actually ended up being not too bad.
No comments:
Post a Comment