Mo glassing the 5' 6" simmons for Miles

 Mo setting up the fin boxes

Fins set

 Fine tuning the cloth prior to glassing

 The master in action laying down some colour.

Boss Hog 10ft 6"

 10ft 6" x 24" x 3 1/2" with custom art Iron Cross

Long concave from the nose right through to the widest point and then it rolls out through the tail . Step forward of the wide point and it just accelerates , place a foot behind the wide point on the rail and it just tips into a turn. All very predictable but fun.

Custom hatchet fin foiled by Wizz in Byron Bay

10ft 6" Alley Slider for Paul

 Some nice flowing lines

 A 10' 6" board sure fills the shaping bay

 Deep concave goes way back and feathers into the flat at the wide point where it also starts to roll off the sides and ends with a kick in the tail.

 Nice big concave in the nose flows way down the board to the wide point behind 1/2 way

Master laminater Peter Mo laying down the colour

 Freshly unmasked Iron Cross custom art

 Gloss finish coat on ready for sand and long polish job for Mo

5ft 6" Simmons for Miles