The stringerless EPS blank being cut on the AKU machiine
First cut down the bottom looks severe but that's just the deep full length concave
All cut and ready to come off the machine. The laser can clearly been seen that helps line things up.
The bottom of the cut corrugations is the actual board design
So lots of delicate fine tuning to get the design tidied up.
All smoothed out and flowing as planned
Double diamond tail a little easier to do than one with a stringer as well.
The lower lights show up the contours that makes this all work.
6ft 3" x 22 1/2" x 2 3/4" for 50 litres